CNC Machining Center for aluminum lineals – 4 axis CNC head w/tool changer and straight cut saw.

  • (2) Universal fixture sections
  • JMC FabRight HMI
  • Network capable with remote diagnostic support
  • Remote PC kiosk with touch screen monitor
  • Creation of fabrication files through CSV file format
  • Machine sequencing and CNC control through PLC motion controller with ethercat drive communication
  • 16’ servo control precision in-feed with absolute encoder feedback provides accurate fabrication placement and OA cut length
  • Photo eyes for automatic length detection
  • Control cables at in-feed load station for track part divider, part grip, cycle start and E-stop
  • (1) bottom mounted 90° saw assembly, w/ 30”m carbide tipped saw blade
  • Hydro-pneumatic vertical saw blade feed
  • Saw blade chassis guided on precision rails and linear bearings
  • (1) 11.5 HP direct drive VP motor resistive braking
  • Spray mist lubrication system
  • 4 axis CNC head with absolute encoder feedback (X, Y, Z, A) (A being the motor rotational axis from -90° to 90° for horizontal fabrication
  • 5 slot automatic tool changer
  • Integrated air wand
  • Pneumatic vertical saw guard/clamping system
  • (1) in-feed automatic positioned horizontal clamp assembly
  • (2) in-feed and (2) out-feed horizontal clamp assemblies
  • Horizontal clamps capable of manual width adjustment
  • Heavy duty steel frame
  • Powder coated finish, blue over white
  • 10’ out-feed roller table
  • 1/2” filter/regulator with OSHA compliant lockout/tagout
  • Chip trays under saw
  • Cycle time specific to fabrication requirement
  • Base Machine Upgrades:
    • Left to right or right to left feed orientation
    • Custom color finishes
    • Safety package upgrades
    • Auto-lubrication system for bearing and ballscrew lubrication
    • Dust collection system
    • Pro-lube lubrication system for extended blade life
  • CNC In-feed:
    • Custom in-feed lengths
    • Single set automatic pre-loading system
    • Double set automatic pre-loading system
    • Diffuse photo eyes for independent mill length detection
    • Linear encoder
  • Out-feed:
    • Power conveyor
    • Wiper table
    • Extractor
  • Technical Specifications
    • Power: 480 V
    • Air: 80 -100 PSI
    • Warranty: One year Parts and Service (Includes on-site installation and training where applicable)

Let’s talk about your dream project

Let’s talk about your dream project

Our mission is simple: To understand your unique requirements, and then engineer, build and install a lineal processing line that meets and exceeds them.