fbpx
cancel
Parts/Support
Contact us white-arrow
search

Sirio

Mitre cut saw, horizontal stroke from back, -22.5° to 22.5° mitre cuts.

  • Has a 7”H x 9”W cut zone
  • Estimated Cycle time: 15-18 seconds per cycle
  • Fabrication Tolerance: ±0.010
  • Ergonomic working height (from 38-1/2” to 44”), fine adjustments made via leveling feet
  • Heavy duty powder coated steel frame
  • Chip diverter to vacuum port
  • 1/2” Filter/Regulator with OSHA compliant lockout/tagout
  • Coalescing air filter
  • Machine lubrication – Grease fittings at each linear bearing
  • Equipped with a 4hp (3400rpm) motor (Keyed 30mm Spindle)
  • Motor carriage rides on precision ground rails and linear bearings
  • Pneumatically activated by Air/Oil cylinder
  • Manually adjustable flow control on cutter stroke cylinder
  • Electrical: 240V AC(20A – 3 Phase) or 480V AC(15A – 3 Phase)
  • Fusible disconnect with OSHA compliant lockout
  • Controls – PLC control system
  • Electrical foot pedal activation
  • TCT saw blade diam. 500mm / 19 11/16″ inches
  • TCT saw blade diam. 530mm / 20 7/8″ inches
  • TCT saw blade diam. 550mm / 21 5/8″ inches
  • Extra for fitting blade diam. 530mm / 20 7/8″ inches, 550mm / 21 5/8″ inches
  • Vertical clamping kit
  • Single-phase motor
  • Emulsified cutting oil 5 5/16 gallons
  • Coolant concentrate 1 5/16 gallons
  • Packing (wooden crate)

Let’s talk about your dream project
Let’s Talkwhite-arrow

Let’s talk about your dream project

Our mission is simple: To understand your unique requirements, and then engineer, build and install a lineal processing line that meets and exceeds them.

LET’S TALK cta-arrow
© 2024 Joseph Machine Company. All right reserved.