MR 1000


The MR-1000 Meeting Rail Processor is an automated end mill fabricating machine with a servo-controlled infeed. Lineals are cut to length using a 90 degree saw and each end is profiled with a cutter stack. The material is fabricated based on the cut files that may be manually entered, loaded by USB jump drives, or downloaded via an available network connection.



  • Estimated Machine Cycle time: 15-20 seconds cut to cut
  • Cut length Tolerance: ±0.015
  • Fabrication Tolerance: ±0.010
  • Ergonomic working height, fine adjustments made via leveling feet
  • One 90 degree saw assembly equipped with a 3 HP motor and 16” carbide tipped saw blade
  • Heavy duty powder coated steel frame
  • Equipped with a 4hp (3400rpm) motor for cutter stack
  • Saw/motor carriage rides on precision ground rails and linear bearings
  • Saw/motor pneumatically activated by Air/Oil cylinders
  • Flow controlled saw and end mill stroke
  • 1/2” Filter/Regulator with OSHA compliant lockout/tagout
  • Coalescing air filter
  • Infeed
    • Servo controlled Infeed accommodates 16’ lineal
    • Left to Right or Right to Left feed orientation
    • Thru-Beam photo eyes for mill length detection
  • Electrical: 240V AC(20A – 3 Phase) or 480V AC(15A – 3 Phase)
  • Fusible disconnect with OSHA compliant lockout/tagout
  • Controls – combined PC + PLC control system
  • Networkable
  • Production data can be downloaded using JMC CSV file format